How to install Fly Rom htc sense 4 ICS on explorer





Disclaimer:
I’m not responsible to any loss or physical damage to phone or void of warranty.


 Note:
This update is only available for HTC’s Explorer smartphone. You can’t be upgrade any other Android device with this tutorial. 


Requirements:

  • Your phone must be rooted. For rooting your phone Follow this link.
  • Your device should be charged up to 80%
  • You need to have a proper data cable to connect your device to PC
  • Have a good backup of your data before applying any update on it
  • Backup SD Card and all your data.
  • Create partition of at least 1 GB. follow this link
  • If you get stuck at boot Install TWRP recovery. Follow this link

 Note:
 Choose your recovery // recommended // as two process are defined before proceeding see whole page once.

 Instructions

 Step 1:
• First download fly rom HTC sense 4 latest build.
  You can download it by following the below link. From here

Step 2:
• Now, Connect your HTC Explorer by using a proper data cable to your PC.

Step 3:
• Copy the downloaded files on your device’s SD card.

Note:
      Do not extract any files.

Step 5:
• Now switch off your device or remove battery and insert.

Step 6:
• Press Volume down key and power button together for 10 sec then bootloader mode menu is displayed. Select recovery option on the menu.

Note:
       Use volume keys to navigate and Power button to confirm choice.

                                           For CWM recovery only


Step 1:
• After rebooting in ClockWorkMode Recovery you need to select wipe data /factory reset.

Step 2 :
• Select wipe dalvik cache and wipe cache partition one by one.

Step 3 :
Mount sd-ext from recovery menu ( if you have problem i recommend you to install TWRP recovery. See requirements and Follow the link to install TWRP recovery & Follow this link to Create sd-ext partition)

Step 4:
• Select install zip from SD card from the recovery menu.

Step 5 :
• And select option chooses zip from sdcard.

Step 6 :
• After downloaded files is navigated press next.

Step 7 :
• The installation process starts. You are not required to do anything.

Step 9:
• Finally, Select +++Go Back++++ and then Reboot System now option.

Step 10 :
• Your device will reboot. It takes a few minutes for setting up OS environment wait for 15-30 minute until device start completely.
Congratulation! Now your HTC Explorer runs on fly rom HTC sense 4 now.

Note: 

 If you get stuck on boot animation install latest TWRP recovery and procced. From here

                                           For TWRP recovery/ other recovery


Step 1:
• After rebooting in TWRP / team win Recovery you need to select wipe data /factory reset from wipe .

Step 2 :
• Select wipe dalvik cache and wipe cache partition one by one from wipe. Go back to home

Step 3 :
• Before install go to mount from the menu and select mount sd-ext.Select install from the recovery menu.

Step 4 :
• And select downloaded zip from sdcard.

Step 5 :
• After downloaded files is navigated press next.

Step 6 :
• The installation process starts. You are not required to do anything.

Step 8:
• Finally, Select reboot and then System option to reboot into system wait for 15- 25 min.